Rc Engine & Model Engine DIY | Tfl 1124 V-Shaped O Boat Brushless Rc Boat Model With 3674/2075Kv Brushless Motor And 120A Esc Artr Version

Tfl Rc Boat Artr Version: No Servo, Controller, Battery, Charger

Features:

.Sss 3674 Brushless Internal Rotor Motor
.It Utilizes Imported Silicon Steel, Magnetic Steel And Bearings. The Motor Has An Effective Efficiency Of Up To 90%, Which Provides Surging Power And Energy Saving For Warships
.The Model Ship Looks Beautiful And Features Powerful Power Configuration. The Boat Can Reach A Speed Of 50-60Km/H, Giving You An Extraordinary Boating Experience.
.Warm Tips: This Ship Is A Artr Version, Excluding Servo, Remote Control, Battery And Charger
.Notice: First Of All, Before Launching The Model Ship, It Is Necessary To Check Whether The Screws In Each Part Are Locked And Ensure That They Are Not Loose, And Check Whether The Transmission System Maintains Sufficient Lubricating Oil. Check Whether The Cooling Water Pipe Is Unblocked. When Debugging Remote Control And Testing Electronic Equipment, Motor Idling Should Not Exceed 10 Seconds. After The Model Ship Is Launched, It Should Be Observed Closely Whether There Is Water Discharge At The Outlet On The Side Of The Ship. If There Is Water Discharge, The Cooling System Is Normal. The Next Step Is To Fly Your Boat With The Waves. Conversely, If There Is No Drainage, The Cooling System Needs To Be Checked Immediately. After The Ship Model Is Used, Please Clear The Water In The Hold Timely To Ensure The Interior Is Dry, So As To Avoid Damage To Electronic Equipment. Focus On Cleaning The Water In The Transmission System, And Apply Anti-Rust Lubricating Oil So That Is Can Be Stored For A Long Time
.For Over 14-Year-Old.

Specifications:

.Color: As Shown
.Material: Imported Vinyl Resin (Glass Fiber) + Metal
.Item: 1124
.Hull Design: V-Shaped (O Boat)
.Hull Size: 930 X 270 X 135Mm
.Power Configuration: 3674/2075Kv Brushless Motor, 120A Esc
.Drive System：Φ4.76 Stinger Drive System
.Drive Shaft: 4.76Mm
.Mouse Tail: 78Mm
.Rudder: 130
.Water Pressure Plate: 57Mm
.Water Knife: 68Mm
.Copper Paddle: 38Mm
.Recommended Equipment: S3006 6Kg Servo(Not Included), Fs-Gt2E/Fs-Gt3B (Not Included)
.Recommended Battery: 14.8V 4000Mah 30C Li-Po Battery Or Higher Capacity(Not Included)
.Product Size: 93 X 27 X 13.5Cm
.Product Weight: 3000G
.Package Dimensions: 113 X 34 X 19Cm
.Package Weight: 4250G
.Packing: Box

Package Content:

.1 X Rc Boat
.1 X Manual